I have a Current Design Extreme which is now their Nomad. I am putting in Sea Dog pedals for an update. I wanted to use the studs that you glass on to the hull to replace the bolt through design. They are here http://www.duckworksbbs.com/hardware/canoe-kayak/footbrace/index.htm
Scroll down half page and you will see the mounting studs. Problem is I cannot reach into the front mount screw to epoxy and then glass over the stud mount. Any suggestions are welcome. I am going to paint the whole boat and was looking to get rid of the through bolts on the hull.
Only thing I can see is to remove the front bulkhead to reach in through the front hatch. It is made of poly and placed in silicone into the hull unlike the newer CD boats which have glass. It would be another PITA to cut out and replace.